Startseite  >
J-CAT LYRA

J-CAT LYRA

DESKTOP-LÖTROBOTER

Der J-CAT LYRA ist ein neuer Lötroboter mit deutlich verbesserten Grundfunktionen, erhöhter Benutzerfreundlichkeit und Haltbarkeit.

Erweiterte Temperatureinstellungen Die Temperatur der Lötspitze kann für jeden Lötpunkt innerhalb desselben Programms individuell eingestellt werden.
Auf diese Weise lassen sich Bauteile mit unterschiedlichen Wärmekapazitäten in hoher Qualität löten, Durchgangslöcher zuverlässig füllen und perfekte Rückseitenverrundungen erzielen.

Features

Advanced Temperature Setting

Iron tip temperature can be set individually for each soldering point within the same program. As a result, high-quality soldering of components with different heat capacities, reliable filling of through-hole and perfect back fillets can be achieved.

Approach Function

The approach function allows fro the programming of an additional axis movement during soldering. This helps to make programming and setup faster and easier for point teaching and also saves intitial setup time.

Dual Iron Units & Feeder (Option)

The high-powered controller can operate two feeder units at the same time. This provides for a reduction in cycle time by 50%. Two iron untis can also be untilized as an option, which is beneficial for soldering high heat capacity components.

Technical Specifications

Type J-CAT 320 LYRA J-CAT 330 LYRA J-CAT 340 LYRA
Drive Method 5-phase stepping motor
Encoder 4-axes Applicable
Resolution X, Y, Z Axes 0.01 mm
R Axis 0.08°
Operation Range X, Y Axes 200x200 mm 300x320 mm 400x400 mm
Z Axis 50 mm 100 mm 150 mm
R Axis ±360 °
Portable Weight 7 kg 15 kg
Maximum Speed X, Y Axes 700mm/sec. 900mm/sec.
Z Axis 250mm/sec. 400 mm/sec.
R Axis 600°/sec. 900°/sec.
Repeatability X, Y, Z Axes ±0.01mm
R Axis ±0.008°
Teaching Method Remote Teaching (JOG)
Manual Data Input (MDI)
External Input/Output Input :16 Output:16
Program Capacity 999 programs
Memory Capacity 32,000 point
Soldering Condition Point and slide total; 500 conditions
Setting Temperature 0~500℃
Solder Feeding Speed 1.0~50.0 mm/sec
Solder Feeding Amount Resolution 0.1 mm
Solder Diameter With ZSB Feeder φ0.4~φ1.0mm (Option: φ0.3, 1.2, 1.6mm)
With Normal Feeder φ0.3~φ1.6mm
Heater Capacity 130W
Air Supply 0.4~0.5MPa (Dry & clean air)
Nitrogen Generator Available (Option: APN-05)
Display Language English, Chinese, Korean, Japanese, French, Spanish, German, Italian, Japanese, Czech, Vietnamese
Power Source AC94~260V (Single phase)
Power Consumption 400W
Dimensions (WxDxH, in mm) 440x453x818mm 684x600x872mm 679x660x897mm
Weight (kg) 30 46 54
contact us

NEXT
JS-3 Lyra II und JC-3 Serie – Inline-Lötroboter