J-CAT LYRA

ROBOT DE BRASAGE DE BUREAU

Le J-CAT LYRA est un nouveau robot de brasage dont les caractéristiques opérationnelles de base, la facilité d’utilisation et la durabilité ont été considérablement améliorées.

Réglages de température avancés La température de la pointe du fer peut être réglée individuellement pour chaque point de soudure au sein d’un même programme.
Il est ainsi possible d’obtenir un brasage de haute qualité de composants ayant des capacités thermiques différentes, un remplissage fiable des trous de passage et des filets arrière parfaits.

Features

Advanced Temperature Setting

Iron tip temperature can be set individually for each soldering point within the same program. As a result, high-quality soldering of components with different heat capacities, reliable filling of through-hole and perfect back fillets can be achieved.

Approach Function

The approach function allows fro the programming of an additional axis movement during soldering. This helps to make programming and setup faster and easier for point teaching and also saves intitial setup time.

Dual Iron Units & Feeder (Option)

The high-powered controller can operate two feeder units at the same time. This provides for a reduction in cycle time by 50%. Two iron untis can also be untilized as an option, which is beneficial for soldering high heat capacity components.

Technical Specifications

Type		J-CAT 320 LYRA	J-CAT 330 LYRA	J-CAT 340 LYRA
Drive Method		5-phase stepping motor
Encoder		4-axes Applicable
Resolution	X, Y, Z Axes	0.01 mm
Resolution	R Axis	0.08°
Operation Range	X, Y Axes	200x200 mm	300x320 mm	400x400 mm
	Z Axis	50 mm	100 mm	150 mm
	R Axis	±360 °
Portable Weight		7 kg	15 kg
Maximum Speed	X, Y Axes	700mm/sec.	900mm/sec.
	Z Axis	250mm/sec.	400 mm/sec.
	R Axis	600°/sec.	900°/sec.
Repeatability	X, Y, Z Axes	±0.01mm
Repeatability	R Axis	±0.008°
Teaching Method		Remote Teaching (JOG)
Teaching Method		Manual Data Input (MDI)
External Input/Output		Input :16 Output:16
Program Capacity		999 programs
Memory Capacity		32,000 point
Soldering Condition		Point and slide total; 500 conditions
Setting Temperature		0~500℃
Solder Feeding Speed		1.0~50.0 mm/sec
Solder Feeding Amount Resolution		0.1 mm
Solder Diameter	With ZSB Feeder	φ0.4~φ1.0mm (Option: φ0.3, 1.2, 1.6mm)
Solder Diameter	With Normal Feeder	φ0.3~φ1.6mm
Heater Capacity		130W
Air Supply		0.4~0.5MPa (Dry & clean air)
Nitrogen Generator		Available (Option: APN-05)
Display Language		English, Chinese, Korean, Japanese, French, Spanish, German, Italian, Japanese, Czech, Vietnamese
Power Source		AC94~260V (Single phase)
Power Consumption		400W
Dimensions (WxDxH, in mm)		440x453x818mm	684x600x872mm	679x660x897mm
Weight (kg)		30	46	54

SUIVANT
Série JS-3 Lyra II et JC-3 – robots de brasage en ligne